OEM / ODM Telephone Manufacturer since 2003 ☎ +86 755 2871 3303✉ sales1@skhelc.com

SIP Desk Phone Buying Guide for Small and Mid-Size Offices

A SIP desk phone is a business telephone that registers on an IP PBX or a hosted voice platform using the Session Initiation Protocol, and places calls over the office network rather than a copper pair. This SIP desk phone buying guide is for small and mid-size offices, and for the importers, distributors and telecom brands that supply them.

Choose a compact two-account model for most staff desks, a larger display or more programmable keys for reception and heavy users, and confirm PoE power and a test on your PBX or cloud platform. A SIP desk phone is not a softphone, and it is not a 4G fixed wireless phone with a SIM card.

Key takeaways

  • A SIP desk phone registers with a SIP account on an IP PBX or hosted voice service and carries the call over the office IP network, not a PSTN wall socket.
  • SIP and VoIP are related but not the same. VoIP is voice over an IP network; SIP is the signalling protocol most business desk phones use, as specified in IETF RFC 3261.
  • Size the phone to the role: two SIP accounts and a compact display for most staff; more accounts, a larger screen or more one-touch keys for reception and multi-line desks.
  • Confirm Power over Ethernet (PoE) and switch capacity before you order. The IP-2017, IP-2023, IP-3000 and IP410 all list PoE.
  • For OEM orders, name the destination countries, the PBX or IMS platform, SIP account count, display language, colours and the required certification marks. The published MOQ is 3,000 pcs.

What is a SIP desk phone?

A SIP desk phone — also called a SIP office phone or a VoIP desk phone — looks like a conventional telephone: handset, keypad, speakerphone and, on most models, a display. Instead of drawing a dial tone from a copper pair, it obtains an IP address and registers SIP accounts with an IP PBX or a cloud / IMS voice platform. Hold, transfer, forward, conference and a directory then come from the phone, the platform, or both.

Cheng Feng Hao’s IP phone range is built for this office and hospitality use. The IP-3000 lists 2 SIP accounts, a 2.4-inch backlit display and PoE for everyday desks. The IP-2023 lists 4 SIP accounts, a 4.3-inch backlit display, PoE and 3-way conference where a larger screen helps. Both are available for OEM and ODM orders.

IP-2023 VoIP SIP desk phone with 4.3-inch backlit colour display, handset and keypad
The IP-2023 has 4 SIP accounts, a 4.3-inch backlit display, PoE, a full-duplex speakerphone and 3-way conference.

A SIP desk phone is not a softphone, and it is not a corded analogue telephone that still needs a PSTN line, a PBX analogue extension or an analogue adapter. If the site has no fixed broadband or IP voice service, compare that path with a 4G fixed wireless phone versus a landline before you standardise on SIP.

SIP vs VoIP: what buyers actually mean

Buyers often treat “SIP phone”, “IP phone” and “VoIP desk phone” as the same product. In a small-office purchase they usually are: a desk phone that speaks SIP to a VoIP service. VoIP is voice carried over an IP network. SIP is the signalling protocol that sets up, modifies and ends those sessions (IETF RFC 3261). A SIP desk phone is the common office form of that hardware. Write “SIP desk phone, compatible with [named PBX or hosted platform]” in the RFQ, not only “VoIP phone”.

Match the SIP desk phone to the desk, not to a single SKU

Split the order by role rather than buying one high-feature SKU for everyone, or only the entry model.

General staff usually take one call at a time and need a clear display for caller ID and a few shortcuts. The IP-3000 lists 2 SIP accounts, a 2.4-inch 320 × 240 backlit display, PoE, a full-duplex speakerphone, speed-dial keys, a 1,000-name phonebook, and standard call handling including transfer, forward and hold.

IP-3000 VoIP SIP desk phone with 2.4-inch backlit display and coiled handset cord
The IP-3000 is a two-account SIP desk phone with a 2.4-inch backlit display and PoE.

Multi-line desks need extra SIP accounts and a readable display. The IP-2017 keeps the 2.4-inch form but lists 4 SIP accounts, a 480 × 320 backlit panel, PoE, a full-duplex speakerphone and 3-way conference. The IP-2023 offers the same four accounts and conference feature on a 4.3-inch display. The IP2035 is specified as a SIP VoIP desk phone with a large colour screen, four soft keys, a navigation cluster with an OK key and a fold-out stand, in black, silver or white.

Reception and assisted-use desks need keys they can press without opening a menu. The IP-8902 lists 2 SIP accounts, 8 programmable keys, quick service keys, speakerphone, intercom, mute, hold, redial, message and hot line. The IP410 is a big-button SIP phone with PoE, two 10/100 Mbps RJ45 ports, 1 SOS key plus 6 one-touch keys, and a two-way speakerphone. It is listed as compatible with main IP PBX and IMS platforms.

IP-8902 VoIP SIP desk phone with programmable keys and speakerphone
The IP-8902 has 2 SIP accounts, 8 programmable keys, quick service keys and intercom, useful at a reception desk.

Display language is an OEM point. The IP-3000, IP-2017 and IP-2023 listings name English, German, Italian, French, Spanish, Portuguese, Russian, Polish, Turkish and Hebrew. If you need another language, or a custom prompt set, say so in the first quotation.

IP410 big-button VoIP SIP phone with SOS key and one-touch memory keys
The IP410 is a big-button SIP desk phone with PoE, two 10/100 Mbps RJ45 ports, 1 SOS key and 6 one-touch keys, listed as compatible with main IP PBX and IMS platforms.

SIP desk phone comparison for a small or mid-size office

Confirm account count, PoE and provisioning on a sample before a volume order.

ModelSIP accountsDisplay and keysPower and networkTypical desk
IP-300022.4-inch 320 × 240 backlit display; speed-dial; full-duplex speakerphonePoEEveryday staff desks
IP-201742.4-inch 480 × 320 backlit display; speed-dial; 3-way conferencePoEMulti-line compact desks
IP-202344.3-inch 480 × 320 backlit display; speed-dial; 3-way conferencePoEHeavier users, larger screen
IP-890228 programmable keys and quick service keys; intercomSee listingReception / one-touch keys
IP410See listingBig buttons; 1 SOS + 6 one-touch keys; two-way speakerphonePoE, 2 × 10/100 Mbps RJ45Assisted-use desks
SIP desk phone comparison from Cheng Feng Hao’s live product listings.

Two further models sit just outside that everyday office set. The IP-2000 lists TR-069 auto-configuration with auto-detection, a speakerphone, 3-party conference and a talking IP address. The IP90 is a hotel bathroom SIP phone with PoE, wall or desk mounting, HD voice (G.722) and listed compatibility with 3CX, Broadsoft, Elastix, Asterisk, Xorcom and other IP PBX or IMS platforms. For guest-room sets, see the hotel phone buying guide.

Power over Ethernet, ports and the LAN

Most business SIP desk phones take Power over Ethernet, so one cable carries data and power from a PoE switch or injector. A UPS on the switch can then keep the phones up in a short power cut, provided the PBX or cloud connection also stays up. The IP-2017, IP-2023, IP-3000, IP410 and IP90 all list PoE. If PoE is not on the specification, ask before you order.

Check three practical points. The switch must support PoE and have enough power budget for every phone on that stack. If it has no PoE, you will need a compatible adaptor at the desk, and many PoE phones do not ship with one. Look at the Ethernet ports too: the IP410 lists two 10/100 Mbps RJ45 ports, a common pass-through so a PC can share the drop. Do not assume Gigabit unless the listing says so. Prefer a wired drop; voice quality also depends on latency, jitter and a simple quality-of-service policy or voice VLAN.

Compatibility, provisioning and what to test on a sample

A SIP desk phone is only useful if it registers cleanly on the platform you already run, or the platform you plan to sell with the phone. The IP410 listing says it is compatible with main IP PBX and IMS platforms. The IP90 listing names 3CX, Broadsoft, Elastix, Asterisk, Xorcom and similar platforms. Those statements apply to the models that carry them. For any other model, test a sample: registration, inbound and outbound calls, hold, transfer, conference if required, and a firmware upgrade path.

Provisioning decides how painful a 20- or 200-unit roll-out will be. Manual entry of a SIP server and password in each web interface works for a handful of desks and does not scale. The IP-2000 lists TR-069 auto-configuration with auto-detection. If your platform uses TR-069 or another auto-provisioning method, put that method in the RFQ and confirm it on the exact firmware you will ship.

When a SIP desk phone is the right choice — and when it is not

  • Choose a SIP desk phone when the office already has, or is moving to, an IP PBX or a hosted voice service, and staff need a physical handset with keys on the desk.
  • Keep or specify an analogue corded phone where a PBX still presents analogue extensions, or a simple instrument must work on an analogue port or adapter. Flash timing and caller ID behaviour then belong in the specification.
  • Consider a 4G fixed wireless phone where there is no reliable fixed broadband or copper line, or the site may move — see the 4G fixed wireless phone vs landline guide.
  • Use a softphone for home or hybrid users who already work on a laptop or mobile, and keep desk phones for roles that share a counter.

A short OEM checklist for a SIP desk phone order

Put the following in the first quotation request so the factory quotes the platform and certificate pack you will actually need. For the wider process, see our OEM vs ODM telephone manufacturing guide.

  1. Destination countries and the voice platform — the IP PBX, IMS or hosted SIP service, including any required auto-provisioning method (for example TR-069) and a sample-test plan.
  2. Role mix and quantities — how many two-account staff phones, four-account or large-display phones, programmable-key / reception phones, and big-button or SOS units.
  3. Network and power — PoE required or not, whether a power adaptor must be in the box, and the Ethernet port speed you need if a PC will share the drop.
  4. Language, branding and packing — display language, logo, colours, carton marks and the manual language. Custom logo, colours, packaging and display language are standard OEM options.
  5. Certification — CE, FCC, RoHS or other marks for the destination, with reports that match the exact SKU (see our telephone certification guide). ISO 9001:2015, ISO 14001:2015, BSCI and ETL are published on the Certificates page. The published MOQ is 3,000 pcs per desk-phone model.

Cheng Feng Hao Electronics, founded in 2003, manufactures OEM and ODM telephones at its Longgang, Shenzhen factory (established 2010): more than 250 employees, including 10 product engineers, a 30,000 m² site and US$10 million in annual output, under the CFH brand. Enquiries to sales1@skhelc.com during office hours (Monday to Saturday, 09:00–18:00 China time, GMT+8) are answered within 24 hours.

Frequently asked questions

What is a SIP desk phone?

It is a business desk telephone that registers one or more SIP accounts on an IP PBX or a hosted voice platform and places calls over the office IP network. It looks like a conventional telephone, with a handset, keypad and usually a display, but it does not need a copper PSTN wall socket.

Is a SIP phone the same as a VoIP phone?

In everyday buying they are often the same product: a desk phone used on a VoIP service. Strictly, VoIP is voice carried over an IP network, and SIP is the signalling protocol (IETF RFC 3261) most business phones use to set up those calls. Specify a SIP desk phone and the named platform, not only “a VoIP phone”.

How many SIP accounts does a small office desk need?

Most staff desks work well with two SIP accounts, as on the IP-3000. Choose a four-account model such as the IP-2017 or IP-2023 when the user handles more than one number or needs a larger display. Reception often needs fewer accounts than you think, but more programmable or one-touch keys, as on the IP-8902.

Do I need Power over Ethernet for a SIP desk phone?

PoE is the cleanest way to power a SIP desk phone: one cable for data and power, and a UPS on the switch can cover a short outage. The IP-2017, IP-2023, IP-3000, IP410 and IP90 all list PoE. If your switch has no PoE, plan for a compatible adaptor at each desk and confirm whether that adaptor is included.

Will a SIP desk phone work with Asterisk or 3CX?

It depends on the model and the firmware. The IP90 listing names 3CX, Broadsoft, Elastix, Asterisk, Xorcom and other IP PBX or IMS platforms. The IP410 is listed as compatible with main IP PBX and IMS platforms. For any other model, test registration and call features on a sample of the exact firmware you will ship.

What should importers specify when ordering OEM SIP desk phones?

Name the destination countries, the PBX or hosted platform, SIP account count and key layout by role, PoE and port requirements, display language, colours, packaging and the certification marks required. Cheng Feng Hao’s published MOQ for these desk phones is 3,000 pcs per model, with custom logo, colours, packaging and language available.

Request a SIP desk phone quotation

If you are comparing SIP desk phone models for a small or mid-size office project, send the destination countries, the PBX or hosted platform, the role mix and the estimated quantity to sales1@skhelc.com or use the contact form. We will confirm which CFH platforms fit and reply within 24 hours during office hours.

sales1@skhelc.com+86 755 2871 3303

Chat on WeChat

Terry Zhang

WeChat QR code for Terry Zhang. Save this image and open WeChat to scan it.

Save this QR code and open WeChat to scan it.

Download QR code
Scroll to Top